| Available options: | Output hopper: side eject or FIFO elevator (First In - First Out). |
| COMMUNICATION - Communication interface: | Serial RS232 port. |
| COMMUNICATION - Protocols: | CIM, Xon-Xoff and Multiembosser. |
| Dot density: | 200 DPI |
| Electrical requirements: | 117 V / 60Hz - 230 V / 50 Hz |
| FEEDING SYSTEM - Fonts: | Standard Windows fonts including special characters and symbols. |
| FEEDING SYSTEM - Input hopper capacity: | MDM2000: 250 plates (0.016") variable dimensions. |
| FEEDING SYSTEM - Logo dimensions: | Max area about 13 square inches. |
| FEEDING SYSTEM - Logos: | Up to 2 at a time, resident in equipment. |
| FEEDING SYSTEM - Output hopper capacity: | MDM2000: side eject or FIFO elevator (250 plates). |
| FEEDING SYSTEM - Plates dimensions: | Width: min 1.2" - max 4.5"
Height: min 0.826" - max 3.5"
Thickness 0.016" ?0.035" |
| FEEDING SYSTEM - Stamping area: | Full plate except 0.039" from the top and left/right edges and
0.275" from the bottom edge. Avoid the edges in order to not damage
the stylus. |
| FEEDING SYSTEM - Stamping pressure: | Adjustable depending on material stamped. |
| FEEDING SYSTEM - Stylus: | Widia |
| Marking force: | 110 lbs |
| Marking speed: | about 50 dots per second. |
